Contact Us

The matrix board is then covered with a piece of rubber and under heat and pressure the rubber flows in the matrix mold and is cured for 7 minutes. The rubber plate is now ready for printing.

WATER SOLUBLE PHOTOPOLYMER PATTERN PLATES SPECIFICATIONS STANDARD MX IMPROVED HX SURFACE NON-MATTE MATTE COLOR GOLD GREEN HARDNESS SHORE D 80-85 ° 90-95 ° SHOULDER ANGLE 25-30 ° 25-30 ° RESOLUTION (LINE/IN.) 150/3% 150/3% MIN ISOLATED DOT (UM) 200 .008" 200 .008" MIN ISOLATED LINE (UM) 40 .0015" 40 .0015" EXP. 21 STEP SCALE* 16-17 15-16 WASHOUT     TEMPERATURE F° 95 ° 95 ° TIME (MIN.)* 3-3.5 3.5-3.5 DRY     TEMPERATURE F° 194-212 ° TIME(MIN.)* 20-25 * Stouffer # Time will vary with relief